Extra exam question E9H01
Subelement E9, ANTENNAS AND TRANSMISSION LINES· Group E9H
When constructing a Beverage antenna, which of the following factors should be included in the design to achieve good performance at the desired frequency?
- A.Its overall length must not exceed 1/4 wavelength
- B.It must be mounted more than 1 wavelength above ground
- C.It should be configured as a four-sided loop
- D.It should be at least one wavelength long (correct answer)
WhyA Beverage antenna should be at least one wavelength long to achieve good performance at its design frequency. A Beverage antenna needs to be at least one wavelength long to achieve good directional performance at its design frequency, since its directivity comes specifically from the traveling wave built up along that substantial length of wire, answer D. It isn't limited to a quarter wavelength (that would be far too short for a Beverage to work as intended), doesn't need to be mounted more than a wavelength above ground (Beverage antennas are typically strung low, close to the ground), and isn't configured as a loop, that describes a different receiving antenna type.
Published 2026-08-28 · Last updated 2026-08-28 · Question text is verbatim from the 2024-2028 NCVEC Element 4 pool (public domain); the explanation above is original writing, see our methodology.
Related questions
- E9H02Which is generally true for 160- and 80-meter receiving antennas?
- E9H03What is receiving directivity factor (RDF)?
- E9H04What is the purpose of placing an electrostatic shield around a small-loop direction-finding antenna?
- E9H05What challenge is presented by a small wire-loop antenna for direction finding?
- E9H06What indicates the correct value of terminating resistance for a Beverage antenna?